Raytheon Data Systems, Tape Drive Emulation - TES-3
The TES-3 emulates reel-to-reel, half inch tape drives that connect to Raytheon Data Systems NRZI, PE or PE/NRZI Magnetic Tape Controller. These drives were used on computers made by Raytheon Data Systems, such as the RDS-500. Tape speed is typically 45ips, Start/Stop only. Recording densities from 800bpi NRZ mode to 1600fpi PE. The TES-3 can replace an existing drive and formatter. An existing formatter and its supported drive may be connected to the TES-3 using a special cable available from Arraid.
The TES-3 is available in a 19" rack mount chassis, with Magneto Optical disk output.
Features and Benefits
- Easy to install. No hardware or software changes required, other than the drive itself.
- Can replace or be added to existing drives.
- Operating system, application and diagnostic software are supported as is.
- An LCD Operator Panel provides full control over drive functions.
- High reliability with near zero maintenance required.
- Greater computer system availability with lower cost of ownership.
- The TES usual output is to 3.5" magneto optical cartridges.
- With tape head alignment no longer an issue, media may be moved from drive to drive without concern for readability.
- MO media is archive quality, impervious to EMI, yielding both reliable media distribution and a 25+ year shelf life.
- Stores the content of multiple 1/2-inch tape reels on a single piece of media.
- This allows for unattended operation (no tape reel changes) in many applications.
- The space required for media storage is greatly reduced.
For More Information
Use this link for an explanation of Tape Drive Emulation.
Get the TES Data Sheet .pdf. Download or View depending on your browser settings.
This Data Sheet applies to all current versions of TES.
Use the highlighted menu selection, Products, to see Models, Enclosures and Popular Options.
Contact your Arraid Representative to discuss how the TES-3 can improve your company's operation.